SummitDicht

System Overview

Acrylic floor paints are single-pack, film-forming coatings designed to provide durable, breathable protection to concrete and bituminous substrates. Formulated using high-quality resin systems, these coatings deliver consistent adhesion, UV stability and controlled flexibility across internal and external environments.

Unlike two-component epoxy systems, acrylic floor coatings cure through solvent or water evaporation and do not rely on chemical cross-linking. This makes them straightforward to apply while maintaining reliable performance for light to medium traffic conditions.

Breathability & Moisture Tolerance

One of the key technical advantages of acrylic systems is their vapour permeability. Concrete slabs without an effective damp proof membrane (DPM), or newly cured substrates retaining residual construction moisture, can generate vapour pressure beneath impermeable coatings.

Acrylic floor paints allow limited moisture vapour transmission, reducing the risk of blistering or delamination where minor moisture movement exists. While not a substitute for correct substrate preparation, this breathability makes acrylic systems suitable for older garage floors and domestic concrete where moisture conditions are not fully controlled.

UV Stability & External Use

Epoxy coatings can yellow and degrade under prolonged UV exposure. Acrylic resins, by contrast, offer inherent UV stability and colour retention.

This makes acrylic floor paints suitable for:

• External concrete walkways
  
• Driveways and parking bays
  
• Plant areas exposed to sunlight
  
• Tarmac refurbishment
  

Where long-term colour stability is required, acrylic technology provides a practical solution.

Compatibility with Asphalt & Tarmac

Concrete is not the only substrate requiring protection. Asphalt and tarmac surfaces remain slightly flexible and can soften under temperature fluctuation.

Rigid, high-build coatings may crack or fail prematurely when applied to bituminous substrates. Acrylic floor paints retain a degree of flexibility, allowing them to accommodate minor surface movement while maintaining film integrity.

Correct preparation remains essential, including cleaning, degreasing and ensuring the surface is structurally sound.

Traffic & Performance Expectations

Acrylic floor systems are best suited to:

• Domestic garages
  
• Storage areas
  
• Workshops with pedestrian traffic
  
• Light equipment environments
  
• External pedestrian routes
  

They are not intended for continuous forklift traffic, heavy pallet movement or aggressive chemical exposure. For such environments, a high-build epoxy or polyurethane system should be specified.

System Selection Guidance

For porous or highly absorbent concrete, priming with an appropriate acrylic primer is recommended to regulate substrate suction and optimise adhesion.

Where higher compressive strength, abrasion resistance or chemical durability is required, consider a two-pack epoxy floor coating system.

Correct system selection should always be based on:

• Substrate condition
  
• Traffic intensity
  
• Moisture profile
  
• Environmental exposure