Everest Trade Paints - Patio Sealer For Concrete Slabs and Flagstones

BENEFITS AND KEY FEATURES

• Enhances natural colours in pre-cast concrete and flagstones
• Fully seals and protects patio slabs against UV light to prevent fading
• Revives your old patio slabs to bring them back to their original colour
• Resists oil and stain penetration
• Durable, long-lasting sealer
• Inhibits mould and algae growth
• Average coverage of 4-6 square meters per litre
• Easy to apply by a roller or sprayer

PRODUCT DESCRIPTION

Everest Trade Paints - Patio Sealer is a highly durable, polyurethane-based sealer for use on pre-cast concrete slabs and flagstones.

This product enhances the colour of the patio while protecting the surface from staining, UV light, mould and algae growth and will increase abrasion resistance while also protect the pointing of the patio from erosion and weed infestation to reduce maintenance.

Easy to apply by a roller or sprayer, gives additional protection to your patio slabs.

USES AND SURFACE COMPATIBILITY
Suitable for use on exterior patio slabs and flagstones made from pre-cast concrete. Do not use on natural stone or sandstone
 
SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
 
SPREADING RATE

• First coat:                Approximately 4 square meters per litre.
• Second coat:           Approximately 6 square meters per litre.

This is a rough estimate and varies depending on the condition of the slabs/flagstones and amount applied with each coat.
 
DRYING TIME
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Fully cured 24 hours after the last coat.
 
APPLICATION
Brush, Roller, or Sprayer.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent sealer hardening. Store away from frost.
 
THINNERS
Thinners aren't required with this product, warm soapy water can be used for clean up.
 
SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease.

If applying on exterior surfaces, please ensure no rain is forecast and the surface is dry before application.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.

DATA SHEETS AND PRODUCT FILES

Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.

Files and Data Sheets

MSDS - Material Safety Data Sheet

Coverage Calculator

This is our coverage calculator. Enter the size (ft²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.